Innkeeper 4 & Innkeeper 2 - Multiline Digital Hybrid
Innkeeper 4 squeezes four independent digital hybrids in a 1U rack space. The front panel keypad, display, and handset jacks provide easy speed dialing and call setup. Digital hybrids allow you to send signals into the phone line while maintaining excellent separation between your voice and the caller. The balanced XLR output jacks contain only the caller’s voice.
Digital hybrids connect audio signals to standard analog telephone lines without the transmit / receive crosstalk common to analog hybrids. The Digital Signal Processor (DSP) continuously monitors both the phone line and audio signals to deliver excellent separation. This proprietary, dual-convergence echo canceller algorithm can achieve excellent separation, typically exceeding 50 dB, without any setup and without sending a noise burst down the line.
The menu driven keypad and back lit display allow you to store 50 phone numbers by name in a phone list. You can also use the display to set features such as the number of rings before auto answer, master send channel selection, and test tone output. An auxiliary telephone jack is provided for each line. The auxiliary telephone is disconnected when you press the “Call” button, and reconnected when you press the “Drop” button.
Innkeeper 4 features Auto-Answer/Auto Disconnect for use in IFB and monitoring applications. Other applications include: telephone interviews, talk shows, church PA interface, and conference room full duplex applications. The Innkeeper 2 is a cut down version of the Innkeeper 4 containing two digital hybrids, with 2 RJ11C interfaces, three female and two male XLR ports.
Line Input: | (5) Balanced Female XLR, 600 ohm, 0 dBm max send |
---|---|
Output Balanced: | (4) Balanced male XLR, 600 ohm +4 dBm max |
Handset: | Front panel handset jacks biased for electret handset (not included) |
Phone Line: | (4) RJ11C |
Aux Phone: | (4) RJ11C |
Isolation: | 1500 VAC |
Ringer: | 0.8B REN |
Frequency Response: | Telephone Side 200 Hz – 3600 Hz |
Power: | 120-240 VAC power supply (included). |
Size: | 26.7 x 18.6 x 4.5cm (19” x 7.3” x 1.75”) |
Weight: | 3.3kg |
Coming soon…
- Can I plug a mic into one of the female XLR jacks?
- No, these are line level inputs only.
- How do I adjust signal levels?
- There are no signal level adjustments. The inputs and outputs are fixed at line level. 0 dBm at the input jack = 0 dBm at the phone line.
- What happens to the phone connection if power is momentarily interrupted?
- FCC and International telecom rules require that we drop the connection if power is lost for any period of time. We strongly suggest that you use a low cost, computer style UPS system if uninterrupted service is required