Interchange - Intercom Phone Bridge
Interchange allows remote access to your party-line intercom through JK Audio Innkeeper Series Digital Hybrids. This professional half rack interface provides a four wire audio interface and remote control connection for JK Audio innkeeper LTD, innkeeper 1x/1rx, or innkeeper 2 Digital Hybrids for POTS lines, or JK Audio AutoHybrid IP2 for VoIP lines. The front panel headset interface jack allows easy connection of your mobile phone, tablet, or computer allowing remote access through a wireless phone or conferencing app.
Listen-Always Design
The Listen-Always design allows both the phone hybrid / 4-wire connection and the mobile phone headset interface to monitor the intercom just like any other belt pack. Listen mode is a high impedance bridging tap on the intercom line. Talk mode is enabled via a front panel switch, either Off, On, or Auto. Auto follows the phone hybrid Auto-Answer mode.
Conference
The Innkeeper 2 or AutoHybrid IP2 conference feature allows two callers to share one intercom connection. Alternatively, the included cables allow Line 1 and Line 2 of the Innkeeper 2 or AutoHybrid IP2 to be connected to two separate Interchange™ units, allowing connection to separate intercom loops.
Features
- HD Voice Compatible (7 kHz Wide-Band Speech)
- Male and Female 3 Pin XLR Intercom Loop Jacks
- Male and Female 3-pin XLR 4-Wire Jacks
- Male XLR Mix Line Out for Monitoring
- Send and Receive LED Metering
- Front Panel Screwdriver Level Controls
- Front Panel Channel Select
- Front Panel Cell Phone Interface
- Listen Always, Talk when Talk-Enabled
- Intercom Powered
- Rack Mountable
- Made in America
- Approved for Sale in Europe
Intercom Channel | Male & Female 3-pin XLR |
Output Level | -10 dBu (250 mV RMS) nominal |
Terminating Impedance | 200 ohms |
Bridging Impedance | >15k ohms |
Pin 1 | Common |
Pin 2 | Audio + 30 VDC ( +12 VDC min ) 50 mA |
Pin 3 | Audio |
Line In | Balanced Female XLR |
Impedance | 20k ohms |
Frequency Response | 50 Hz – 20 kHz |
Level | 500 mV RMS (-4 dBu nom, +12 dBu max) |
Line Out | Balanced Female XLR |
Impedance | 200 ohms |
Frequency Response | 50 Hz – 20 kHz |
Level | 500 mV RMS (-4 dBu nom, +12 dBu max) |
Headset Interface | |
Connection | 3.5 mm TRRS |
Frequency Response | Wireless Interface 50 Hz – 7 kHz (HD Voice) |
Misc | |
Power | Intercom powered +30 VDC (+12 VDC minimum) 50 mA |
Size | 7.6” x 5.3” x 1.5” (20 x 14 x 4 cm) |
Weight | 1.2 lbs (0.5 kg) |