Innkeeper PBX - Desktop Digital Hybrid
Innkeeper PBX easily converts your multi-line PBX type telephone system into a professional, affordable talk show console. Simply connect between your telephone handset and the phone base. So simple, anyone can do it.
Talk Show: Connect Innkeeper PBX between your console and your existing multi-line telephone. Your producer can screen callers from another phone while you take callers on the air by simply selecting available lines on your phone.
Interviews: Use Innkeeper PBX in your newsroom to record high quality interviews. Connect a mic and headphones to your PBX telephone while maintaining excellent separation between your voice and the caller.
Conference Room: Easily connect your PA system to the existing PBX telephone system. The echo canceller algorithm can prevent feedback and allow full duplex conversations.
The digital hybrid connects audio signals to your PBX type telephone system through the telephone handset cord. The Digital Signal Processor (DSP) continuously monitors both transmit and receive audio signals to deliver excellent separation. This proprietary, dual-convergence echo canceller algorithm can achieve excellent separation without any setup, and without sending a noise burst down the line.
Innkeeper PBX provides connections for a microphone, headphones, mixer, sound card, and telephone handset. The stereo output jack on the back of the unit provides your voice on one channel and only the caller’s voice on the other channel. The balanced XLR output jack contains only the caller’s voice. The Handset and Broadcast buttons select between talking on the handset, or sending and receiving through the audio connections.
Input | Balanced Female XLR, 1kohm, -10 mVRMS (-35 dBV nom) Mic/Line pad switch = +4dBV max Line: 3.5 mm mono, 20kohm, 250 mV RMS (-10 dBV nom) |
---|---|
Output | Balanced: Male XLR, 200ohm, 500 mV RMS (+12 dBV max) Unbalanced: 3.5 mm stereo, 50 ohms, 250 mV RMS (+4 dBV max) (Left = send, Right = caller). |
Headphone: | 3.5 mm stereo, 8 ohms, 250 mW, mixed send and receive. |
Phone Line: | RJ11C |
Aux Phone: | RJ11C |
Isolation: | 1500 VAC |
Ringer: | 0.8B REN |
Frequency Response: | Telephone Side 200 Hz – 3600 Hz |
Power: | 120-240 VAC power supply (included). |
Size: | 7″ x 6″; x 1.6″ (18 x 15 x 4.2 cm) |
Weight: | 2.2 pounds |
- Will Innkeeper PBX work with my __________ PBX phone system?
- Probably yes. We have to say probably because the handset interface is proprietary and therefore can change from model to model. We have no way of predicting how a phone manufacturer will use the handset wires in the future. The three handset microphone types that we support, electret, dynamic, and carbon, cover every handset microphone type that we have seen in use, but the wire diagrams can change without notice.
- Can Innkeeper PBX auto-answer or auto-disconnect?
- No, the handset cord on your telephone is only active when the handset is off-hook. This is done manually. There is no way to then auto-disconnect. You must return the handset to the cradle.