Thank you for requesting the USB Update Tool. Please complete the form below to guarantee your Radio Services discount.
CallMe RØDECaster Add-on
CallMe Codec capability is now available as a simple upgrade for RØDECaster Pro II and RØDECaster Duo
The add-on provides fully integrated IP audio connectivity without the need for any modification or external interface. The enhancement provides a cost-effective one-box solution for Outside Broadcast, Podcasting and Web Streaming with Cabled, Wi-Fi and Mobile internet connectivity. Upgraded units have the same straightforward operation as CallMe-T hardware codecs, providing 20kHz low-delay Opus Audio, compatible with most manufacturers’ codecs that support the same standards.T
The CallMe add-on does not change the normal operation of the RØDECaster and is simple to install using a special USB Update Tool.
Request yours today using the form below.
Request your USB Update Tool Now!
The USB Update Tool will be sent once the information provided has been validated and usually within 24 hours. If you require the USB Update Tool urgently, please also contact us by e-mail to info@vtx.uk
| SUPPORTED CODECS | Opus Stereo, Opus Mono & Dual Mono 8–510kbps, G.722 and G.711 μ-law and A-law | ||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ANALOGUE BANDWIDTH | 20Hz–20kHz | ||||||||||||||||||||||
| NETWORK | 100BASE-TX Ethernet on RJ45, Internal WiFi and External 4G (USB) | ||||||||||||||||||||||
| IP PROTOCOLS AND PORTS |
|
- Fill out the form above to request the USB Update Tool
- Run the USB Update Tool on your Windows Computer
- Connect your RØDECaster to your computer using the USB1 port on the mixer
- Select your mixer from the drop-down list and click Update. The process will take about 4 minutes to complete and the RØDECaster will reboot several times.
- Connect the mixer to the internet and switch to the CallMe interface by pressing the Left & Right bank switching simultaneously.
- Scan the QR code and follow the instruction on the licencing page.
- Alternatively contact us with the Unit ID displayed on the screen
- Once the licence’s been issued tap the Check for Licence button and you are ready to use the RØDECaster Mixer now with CallMe add-on.