The Sourcerer Structured Cable Television System transmits near broadcast-quality video and stereo audio over twisted-pair cable, enabling broadcast signals and local video to be distributed around offices, conference suites, institutions and public areas using existing CAT-5, CAT-5e, CAT-6 and most computer / telecom twisted pair cabling.
 |
PBE-202 Audio Snake - 4 Channel of analogue or digital audio over a single CAT-x cable. Sends Mic/Line level audio or AES/EBU distances upto about 600m (approx 1800ft) - plus phantom power if using screened CAT-x cable. |
|---|---|
 |
PBE-301 Receiver - Composite Video & Stereo Audio The PBE-301R Receiver operates with either the PBE-301S single channel driver or the PBE316 multi-channel driver and provides baseband composite video and stereo audio for connection to a local television/monitor. |
 |
PBE-301 Sender - Composite Video & Stereo Audio The PBE-301S(C) driver transmits signals over CAT-5 cable to the PBE-301R receiver, which converts them to baseband video and stereo audio for display on a television/monitor. |
 |
PBE-303SR - Passive Balun for Composite Video and Stereo Audio The PBE-303SR Balun operates with either itself an a sender, the PBE-301S single channel driver or the PBE316 multi-channel driver and provides baseband composite video and stereo audio for connection to a local television/monitor. |
 |
PBE-316 Distribution System - Composite Video & Stereo Audio The PBE-316 accepts 16 video and stereo audio sources for distribution to up to 12 PBE-301R receivers. Racks can be cascaded to provide additional destinations. The PBE-316 can also be configured for multi-channel point-to-point operation. |
 |
PBE-632 Distribution System - Composite Video & Stereo Audio The PBE-632 accepts 32 video and stereo audio sources for distribution to up to 12 PBE-301R receivers. Racks can be cascaded to provide additional destinations. The PBE-632 can also be configured for multi-channel point-to-point operation. |
 |
PBE-822 - High Definition Component Video + Audio Balun Send High Definition Component Video and Audio signals on UTP at distances of up to 500 ft |
 |
Sends HD component with data + IR and audio distances upto about 150m (500 ft approx). |
 |
PBE-840 Series - Baseband video baluns Baluns for security cameras, video conferencing and other baseband video applications. |
 |
PBE-850SR - ULTRA Broadband Video Baluns for sending/receiving RF/Cable/Satellite over CAT-5 Transport ALL CATV spectrum video signals over UTP |
 |
The PBE-890 Series of RGB Video Baluns provides you with the ability to send RGB video over standard telecom wiring (UTP) |
 |
PBE-902 - S-Video + Stereo Audio Balun S-Video (Y/C baseband) channel and 2 audio channels on one run of UTP |
 |
PBE-920 - Component Video Baluns Send Component Video signals on UTP at distances of up to 600 meters. Component video formats include RGB, YUV, YIQ and YCrCb. |
 |
The PBE-930 VGA Video Balun Set allows computer video signals that adhere to the VGA/ SVGA/XVGA standards to be transmitted over Category 5 or better UTP wiring. |
 |
PBE-937/2 - Active VGA Dual Set The PBE-937-2 Active VGA Set, Dual Output is based on the solid foundation of our Passive VGA balun series. This first product in the Active VGA line allows signals to be sent from a computer over a single 4 pair UTP run at distances of over 100 meters. |
 |
PBE-980 - Sends XGA plus audio over structured cable Send XGA plus audio on UTP/STP distances up to 100+ metres with splitter at sending end and dual outputs. |
 |
Provides interface to allow the use of IP cameras over legacy coax installations. |
 |
PBE-SDI - Serial Digital Video Media Converter for SDI Video CAT-5 The PBE-SDI Serial Digital Video Media Converter is designed to run SMPTE 259M video signals over high performance UTP (Cat5e or better). |
