PBE-202 Audio Snake - 4 Channel of analogue or digital audio over a single CAT-x cable.

Audio Snake provides 4 analogue or digital audio channels over one CAT-x cable


Connectors for Audio Snake

The PBE-202 Audio Snake comprises a pair metal boxes that are used to send up to four audio signals over a single run of CAT-5, CAT-5E or CAT-6 cables. They are low-cost, compact, lightweight and together with a roll of CAT5 cable can solve dozens of live and/or recording real world sound problems.

These passive units (no power required) are bidirectional and carry 4x independent audio signals many hundreds of metres without hum or interference - including Mic level signals and phantom power.

Designed to the highest professional standards the PBE-202 Audio Snake has a wide, flat frequency response, low THD distortion and residual noise.

You can mix and match Mic/Line, Line or AES/EBU configurations making the Audio Snake a very versatile high quality means of transporting analogue or digital audio. The Audio Snake has been factory tested over CAT-5 UTP to 600m (1,900 ft approx) using low Z dynamic microphones and Phantom Power tested to 280m (850ft approx) using shielded cable (STP).

Audio Snake Block Diagram


Bandwidth: 20 Hz to 20 Khz
Crosstalk: Better than -95 dB at 20 KHz
Connectors: PBE-202S Sending end - 4x Female XLR to Ethercon RJ45 jack
PBE-202R Receiving end - Ethercon RJ45 to 4x Male XLR
Dimensions: 107mm x 70mm x 45mm
Weight: 400 grams (0.4 Kg)