CADS Analogue > Digital & CDAS Digital > Analogue Converters
CDAS and CADS modules offer high-quality conversion between component analogue video (YUV and RGB) and 270Mbits/second component serial digital (CCIR-601 / SMPTE 259) video, integrating digital and analogue production equipment in the broadcast signal chain.
These modular converters can be mounted in a 3U rackframe, or as 4 self-powered modules in a 1U frame, or they may be independently housed in a desktop case (2 of the digital outputs are removed to accommodate power access in the self powered presentation).
The CDAS module converts a 10-bit 270Mbits/second component serial digital video to two component analogue outputs switchable between RGB and YUV, a composite sync output plus 4 reclocked serial digital signals.
The CADS module converts an analogue signal of 525 lines / 60Hz or 625 lines / 50Hz to 270Mbits/second 10-bit serial digital component video. The looping input is switchable between RGB and YUV, there is a looping sync input and 4 digital outputs.
A single channel analogue to digital converter, the CADS Key, is provided for applications where only the luminance signal is required (such as for linear keying). This offers the same broadcast-standard performance as the standard digital converter, but in a low cost module.
Specifications |
CDAS: |
Input equalization |
270Mbit/sec serial digital differential 10-bit data, CCIR-601 / SMPTE 259, 75W BNC
Up to 200m Belden 8281
|
Analogue outputs |
2 x RGB or YCrCb, 75W BNC |
Analogue output selection |
Switchable RGB or YCrCb |
Television standard |
525 or 625 lines, automatic selection |
Signal bandwidth |
Y = 5.2MHz, CrCb = 2.6MHz, ±0.25dB |
Delay |
Luminance/chrominance < 5ns |
Sync phase |
148ns steps plus trim |
Digital outputs |
4 x reclocked 270Mbit/s 75W digital outputs (2 with ¼ frame self-powered presentation) |
Output amplitude |
800mV ±10% |
Jitter |
< 50ps (RMS) |
Sync output |
1 x composite syncs |
Error indication |
LED on front panel |
|
CADS: |
Analogue input |
RGB or YCrCb, 75W BNC, looping
Separate looping composite sync input
|
Input selection |
Switchable RGB or YCrCb on front panel |
Television standard |
525 or 625 lines, manual selection |
Signal bandwidth |
Y = 5.2MHz, CrCb = 2.6MHz, ±0.25dB |
Sync phase adjustment |
On front panel |
Overload indication |
On front panel |
Outputs |
4x 270Mbit/sec serial digital differential 10-bit data, CCIR-601 / SMPTE 259, 75W BNC (3 with ¼ frame) |
Output amplitude |
800mV ±10% |
|
CADS Key: |
Input |
Y (luminance), looping, 75W BNC |
Input standard |
525 or 625 lines |
Output |
4x 270Mbit/sec serial digital differential 10-bit data, CCIR-601 / SMPTE 259, 75W BNC |
Signal bandwidth |
5.2MHz ±0.25dB |
Phase adjustment |
148ns steps plus trim |
|
System: |
CDAS |
Digital to component video converter card |
CADS |
Component to digital video converter card |
CADS Key |
Luminance to digital video converter card |
CADS-RK14 |
¼ width desktop housing |
CADS-RS4 |
1U rackframe shell for up to 4 RK14 modules |
CADS-RK3D |
3U rackframe for up to 9 cards |
CDAS-I |
CDAS rear panel interconnect for 3U frame |
|